Alinco DJ-X100 Scanner 30-470 MHz FM/NFM/AM/NAM/DCR/NXDN/DMR/D-STAR/C4FM

Alinco DJ-X100 Scanner 30-470 MHz FM/NFM/AM/NAM/DCR/NXDN/DMR/D-STAR/C4FM

Characteristics:

Intuitive operation with an easy-to-understand operating system

The setting menu is operated by dialing and Enter key, and the operation guide icons are displayed at the bottom of the screen. The hierarchical and easy-to-understand structure offers both multifunctionality and delicate operation.

USB Type-C port

Charging with a USB adapter (about 5 hours) or connecting to a PC is now possible with just the included USB cable. It can also be charged with a portable charger, so it can be used in conjunction with the optional dry battery case for long-lasting reception in the field.

Instrument-inspired design and easy-to-read color TFT LCD

A simple design that resembles a measuring instrument is adopted. The numeric keypad is cleverly finished with membrane switches, and the screen display uses a 2.0-inch color TFT LCD with 320 x 240 pixels to display various information in a surprisingly easy-to-read way. The display color can be freely specified using RGB values for the screen and text. The display color can be freely specified using RGB values for the screen and text. Regardless of the color, the battery consumption is the same.

Equipped with an FM radio monitor

A dedicated IC is used for FM radio reception, allowing users to listen to FM radio broadcasts when there is no communication. When a signal is received, the radio volume can be automatically lowered to facilitate listening to communications.

Reception mode

Analog Voice: AM / NAM / FM (20 kHz) / NFM (12.5 kHz) / FM radio broadcasts Digital Voice: DCR / NXDN / DMR (Tier 1/2) / D-STAR / C4FM (DN) / dPMR DATA: FSK compatible DATA signals (AIS and ACARS modes show text and location information on the display)

SDR configuration with low power consumption DSP

A low power consumption DSP is used for demodulation processing of digital AND analog signals. Find the nearest radio station with GPS

The GPS receiver is compatible with MICHIBIKI, GALILEO and GLONASS and with the "in-range search" function, which recalls only the memory channels of radio stations whose longitude and latitude are recorded in advance.

Equipped with 999 high-function memory channels

The 999-channel memory system supports advanced memory channel operation by recording a wide variety of data, including communication settings, 14-character double-byte (28-character single-byte) memory names, position information, and multiple registrations in 26 banks. (Channel 001 is used for the priority scan function.)

Position display mode displays station positions on the screen

GPS position information and position information in the received data signal are analyzed to display the position and direction of the other party. AIS (real-time position information transmitted from the vessel) mode displays the vessel's position, direction of travel and distance from the receiving position. Position editing and display software

Utility software for memory, bank, and various scan link settings and name entry, as well as location display software that allows you to overlay location information on a map, will be distributed free of charge from the Alinco website. The 12kHz (W/N) IF output used by third-party receiver software is also supported.

AND MORE---

Scheduled scans can be freely set up to 50 pairs, which can be linked to form up to 20 link sets, allowing for a variety of scans.

Timer skip, which is automatically canceled after a specified amount of time has elapsed.

Priority scan that works even while scanning to ensure the desired signal is not lost.

Convenient backlight control, such as turning it on when scanning is stopped or when audio is output.

Offset step for easy step switching>

CTCSS and DCS decoding including reverse.

Analog tones/codes and DCR/NXDN user codes are automatically scanned, received and displayed. 9 status VFO/Memory, Scan, setup screens, etc. can be instantly recalled with a long press of a key.

Message view function that automatically displays text information when received.

Large diameter speakers and BTL amplifiers for high volume

Commercially available stereo earphones can be used (monaural audio)

* Cellular frequencies locked on all models.

* The Inversion-scramble decoder is only available in the E version

Approximate battery life (approximately):

Condition: RX 6 sec, Stand-by 54 sec Battery saver ON.

Battery pack / Dry battery case.

GPS/FM transmission: Off 16 hours / ON 7 hours

GPS: On (FM off) 13 hours / 6 hours

FM: On (GPS off) 12 hours / 5 hours

*Operating times may vary based on usage and settings. High quality alkaline

Specifications

Receiver Range: 30.0~470.0MHz / 76.0~108.0MHz (WFM only)

Mode: Analog: FM/NFM/AM/NAM/WFM/DCR/DMR/NXDN/dPMR/D-STAR voice/C4FM (DN) / AIS and ACARS data

Antenna Impedance: 50 ohm (SMA)

Power supply voltage: 3.6V DC lithium-ion battery (EBP-114A, 3120mAh)

Dry battery (EDH-43 optional: 3 AA 4.5V DC) 4

External power supply (USB Type-C) 5V DC

Power consumption (approx.): Standby: 150 mA (BS ON, backlight, FM mode, GPS OFF) / 300 mA (backlight/WFM mode OFF, GPS ON)

Reception: 500mA (FM nominal output, backlight/WFM mode OFF, GPS ON)

Temperature range: Reception: -20°C to +60°C (-4°F to +140°F)

Charging: +10 to +40 °C (50 to 104 °F)

Frequency Stability: -7 to +3 ppm (-10 to +60 °C engraved) (+14 to +140 °F engraved)

Dimensions without overhang: Width 58 (2.283) x Height 110 (4.331) x Depth 32.5 mm/inch (excluding antenna)

Weight: Approx. 260g/9.171oz (including antenna and battery)

Belt Clip: Approx. 14g/0.493oz

Receiver: [FM/AM/Digital/Data] Triple conversion superheterodyne / 1st IF: 243.95 MHz. / 2nd IF: 50.85 MHz / 3rd IF 450 kHz

[WFM] Direct Conversion

Sensitivity: FM / NFM: -10 dBuV (12 dB SINAD)

AM / NAM: 2 dBuV (10 dB S/N)

T98: -10 dBuV (BER 1%) / DMR: -7 dBuV (BER 1%)

D-STAR: -10 dBuV (BER 1%)

C4FM (DN): -7 dBuV (BER 1%)

AIS: -5 dBuV (BER 1%, 162 MHz only)

WFM: -2 dBuV (12 dB SINAD)

Audio output power: Internal speaker 400mW (10% distortion / 8 ohms)

External terminal 40 mW (10% distortion / 32 ohms)

Specifications subject to change without notice or obligation.

Cellular frequencies blocked. The electronic version is available with the appropriate documentation only to authorized users in certain countries.