RigExpert WTI-1 Wireless Transceiver Interface
https://youtu.be/wyIUOqVFxVU
Collega
il ricetrasmettitore ad Internet tramite una rete Wi-Fi. Puoi
Utilizzare il portatile per operare modi digitali e fonia , CW o da qualsiasi parte
del mondo !
RigExpert
WTI -1 è un nuovo rivoluzionario dispositivo per interfacciare il ricetrasmettitore
al computer in modalità wireless . Esso
prevede :
Interfaccia
audio Transceiver
Interfaccia
audio analogica è un collegamento con l'uscita audio (connettore altoparlante esterno
o uscita di linea) e ingresso audio del transceiver ( connettore del microfono o
ingresso di linea ) . L'interfaccia
audio consente do operare nei modi digitali , registrazione e riproduzione di voce
, così come altre funzioni utili ( come misurare i livelli di un segnale in arrivo)
utilizzando un computer .
È
possibile utilizzare un auricolare tradizionale sul tuo computer per operare modalità
fonia. Un
drive virtuale per scheda audio è fornito a supportare le modalità digitali operanti
.
Interfaccia
CAT per vari modelli ricetrasmettitore
Sistema
CAT ( Computer Aided Transceiver ) consente il controllo della frequenza del ricetrasmettitore
, le modalità operative e le altre funzioni di software per computer . Normalmente
, ricetrasmettitori moderni hanno di serie ( con vari livelli di segnale ) fornendo
un'interfaccia CAT .
In
RigExpert WTI - 1 , porta d'interfaccia CAT è visto come una porta COM da un software
.
uscita
FSK
FSK
(Frequency Shift Keying ) è un metodo popolare di trasmissione di messaggi digitali
oltre la radio utilizzate principalmente in modalità ( RTTY ) radioteletype . La
maggior parte dei ricetrasmettitori forniscono funzionalità modulatore FSK per rendere
il segnale RTTY stabile e chiaro .
">Una porta
COM separata viene assegnato per l'uscita FSK quando si utilizza RigExpert WTI -
1 .
">Funzioni di uscita PTT e CW
Ricetrasmettitori
forniscono PTT ( Push To Talk) e CW ( Continuous Wave) ingressi keyer per permettere
l'impostazione del trasmettitore acceso o spento e il funzionamento CW utilizzando
dispositivo esterno (pedale PTT , CW bug o paddle , controllore nodo terminale ,
o personal computer) .
In
RigExpert WTI - 1 , uscite PTT e CW sono assegnati alle linee RTS e DTR di una porta
COM separata . Inoltre
, l'utente può premere il pulsante PTT sullo schermo per attivare la trasmissione
.
emulazione
WinKey
Per
il funzionamento CW , è possibile utilizzare il software che sia manipola direttamente
la linea DTR , o utilizza il protocollo WinKey .
Una
porta COM viene creata nel sistema per sostenere lo scambio di dati WinKey .
-
Transceiver audio interface for operating digital
modes, voice recording and playback
-
CAT (Computer Aided Transceiver) system
-
FSK output
-
PTT and CW outputs
-
WinKey emulation
Initial configuration:
direct connection to a PC
-
USB (Universal Serial Bus) connector
-
USB 1/2/3 compliant
-
Powered from the USB port
-
No USB drivers required
-
Windows 2000/XP/2003/Vista/7/8 (32- or 64-bit)
operating system
Normal operation:
local area network connection
-
2.4 GHz Wi-Fi network, 802.11 b/g/n
-
Infrastructure mode; a wireless access point
or a wireless router is required
-
Open of encrypted networks are supported
-
External power supply (9...15 V DC, max. 0.5
A) is required
-
Windows 2000/XP/2003/Vista/7/8 (32- or 64-bit)
operating system on the operator's computer
-
The virtual serial port, the virtual sound
card and the controlling software is provided free of charge
Remote operation
via Internet
-
ADSL or other high-speed Internet connection
is required for remote operation
-
Static or dynamic IPV4 Internet addresses are
supported at the transceiver side
-
The router should be set up to forward several
UDP and TCP ports to the WTI-1
-
Any reasonably fast Internet connection at
the operator side
Transceiver connection
-
Single 25-pin connector for transceiver cable
-
Various transceiver models supported
Audio interface
-
Insulated from digital nets
-
Maximum input/output amplitude is 1V
-
Input/output samplerate: 8 to 48 kHz
-
True 16-bit DAC/ADC used
CAT serial port
-
Baudrate: 300-115200 baud
-
Electrical compatibility: RS-232, CI-V, TTL or
inverted-TTL (Yaesu, Icom, Kenwood, Ten-Tec, Elecraft and JRC transceivers)
PTT/CW outputs
-
PTT output: open collector and TTL-level
-
CW output: open collector
-
Maximum current is 500 mA
FSK output
Baudrate: 45-1200 baud
Dimensions: 12 x 8 x 3 cm
Weight: 0.3 kg
|
Cable type
|
Supported transceivers
|
|
IC-001
|
Icom IC-707, IC-275, IC-721, IC-725, IC-726, IC-728, IC-729, IC-732, IC-735,
IC-736, IC-737, IC-738, IC-756 (all models), IC-761, IC-765, IC-775, IC-781,
IC-7851, IC-970, IC-7600, IC-7700, IC-7800, IC-7851
|
|
IC-002
|
Icom IC-703, IC-706 (all models), IC-718, IC-7000 (using DIN-13 ACC socket),
IC-7200, IC-7300, IC-7410, IC-7610, IC-9100
|
|
IC-003
|
Icom IC-746 (all models), IC-7400
|
|
TS-001S
|
Kenwood TS-570S, TS-570D, TS-590S, TS-2000, TS-2000X, TS-B2000
|
|
TS-002
|
Kenwood TS-850, TS-950
|
|
TS-003
|
Kenwood TS-480HX, TS-480SAT
|
|
TS-004
|
Kenwood TS-450, TS-690, TS-140
|
|
TS-005
|
Kenwood TS-870S
|
|
TS-006S
|
Kenwood TS-990S
|
|
YS-001
|
Yaesu FT-100, FT-817, FT-817ND, FT-857, FT-857D, FT-897, FT-897D
|
|
YS-002S
|
Yaesu FT-1000MP, FT-1000MP Mark-V, FT-2000, FT-2000D, FT DX 5000, FT DX 5000D,
FT DX 5000MP (using PATCH and AF OUT sockets)
|
|
YS-003S
|
Yaesu FT-1000, FT-1000D
|
|
YS-005
|
Yaesu FT-450, FT-450D, FT-991
|
|
YS-006
|
Yaesu FT-950, FT DX 1200, FT DX 3000
|
|
YS-007S
|
Yaesu FT-1000MP, FT-1000MP Mark-V, FT-2000, FT-2000D, FT DX 5000, FT DX 5000D,
FT DX 5000MP (using PACKET and AF OUT sockets)
|
|
YS-009S
|
Yaesu FT DX 9000, FT DX 9000D, FT DX 9000MP (using PACKET and AF OUT sockets)
|
|
TT-001S
|
Ten-Tec Orion
|
|
EL-001S
|
Elecraft K3
|
|
EL-002
|
Elecraft KX3
|
Connect your transceiver to the Internet via a
Wi-Fi network. Use your laptop to operate phone, CW or digital modes from anywhere
in the world!
RigExpert WTI-1 is a revolutionary new device to
interface your transceiver to your computer wirelessly. It provides:
-
Transceiver audio interface
Analog
audio interface is a connection to transceiver audio output (external speaker
connector or line output) and transceiver audio input (microphone connector or
line input). Audio interface enables operating digital modes, recording and playing
voice, as well as other useful functions (such as measuring levels of a signal
from the air) by using a computer.
You may use a conventional headset
on your computer to operate voice modes. A virtual sound card drives is provided
to support operating digital modes.
-
CAT interface for various transceiver models
CAT (Computer Aided Transceiver) system provides control of transceiver frequency,
operating mode and other functions by computer software. Normally, modern transceivers
have serial (with various signal levels) link providing CAT interface.
In RigExpert WTI-1, CAT interface port is seen as a COM port by computer software.
-
FSK output
FSK (Frequency Shift Keying)
is a popular method of transmitting digital messages over radio primarily used
in radioteletype (RTTY) mode. Most transceivers provide FSK modulator feature
to make the RTTY signal stable and clear.
A separate COM port is assigned
for the FSK output when using RigExpert WTI-1.
-
PTT and CW output functions
Transceivers
provide PTT (Push To Talk) and CW (Continuous Wave) keyer inputs to allow setting
the transmitter on or off and operating CW using external device (PTT pedal, CW
bug or paddle, terminal node controller, or personal computer).
In
RigExpert WTI-1, PTT and CW outputs are assigned to the RTS and DTR lines of a
separate COM port. In addition, the user may press the PTT button on the screen
to activate transmission.
-
WinKey emulation
To operate CW, you
may use software which either directly manipulates the DTR line, or uses the WinKey
protocol.
A separate COM port is created in the system to support
the WinKey data exchange.
