OM Power OM2501A Amplificatore lineare
OM Power OM2500A Amplificatore lineare
OM Power OM2500A Amplificatore lineare
OM Power OM2500A Amplificatore lineare
OM Power OM2500A Amplificatore lineare
OM Power OM2500A Amplificatore lineare
OM Power OM2501A Amplificatore lineare
OM Power OM2500A Amplificatore lineare
OM Power OM2500A Amplificatore lineare
OM Power OM2500A Amplificatore lineare
OM Power OM2500A Amplificatore lineare
OM Power OM2500A Amplificatore lineare

OM Power OM2501A Amplificatore lineare

OM2501A
Prenotalo subito!
5.850,00 €
Tasse incluse
- Chiedere i tempi di consegna

Puoi acquistare questo prodotto con Sella Personal Credit. Clicca qui per maggiori informazioni.


OM2501A

 

CHIEDERE QUALI SONO I TEMPI DI SPEDIZIONE

 

DESCRIZIONE GENERALE 

L'amplificatore lineare OM2501A, è progettatp per tutte le bande a onde corte amatoriali da 1,8 fino a 29 MHz (tra cui WARC - bande) e tutte le modalità. E' dotato di un tetrodo ceramica FU-728F o su richiesta con maggiorazione prezzo con una GU-84B


I vantaggi di OM2501A:      

Piena compatibilità con TRXs-CAT          

- VENGO          

- YAESU          

- ELECRAFT          

- Ten-Tec Orione          

- Kenwood          

- Protocollo di ricetrasmissione Icom utilizzato da dispositivi microHAM 

– Uscita CI-V (MK II, MK2R, MK2R+, ecc.)          

-Flex Radio Serie 6xxx          

- Apache Labs Anna      

Commutazione di banda e frequenza sensibile RF, per l'uso con radio che non dispongono di CAT      

Passaggio automatico da una banda all'altra      

Sintonia automatica con la banda a segmenti      

Commutazione automatica del filtro passa banda 

Uscita BAND DATA compatibile con radio YAESU (codice BCD)      

Commutazione automatica degli interruttori dell'antenna - il numero massimo di antenne è 10, controllato dal codice di uscita BCD      

Controllo remoto tramite applicazione PC Windows 

 

   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   

Specification of OM2501A:

Frequency coverage: Amateur Bands 1.8 – 29.7 MHz including WARC
Power output: 2500 W in SSB and CW on HF bands,
2000W in RTTY/FM
Input Power: 30 to 60W for full output power
Input Impedance: 50 Ohm, VSWR < 1.5 : 1
Power Gain: 17 dB
Output Impedance: 50 Ohm unbalanced
Maximum Output SWR: 3:1
SWR protection: Automatic switching to STBY when reflected power is 350W or higher
Intermodulation distortion: better than -32dBc
Suppression of harmonics: < -50 dBc
Tube: 1x FU-728F or GU84B ceramic tetrode
Cooler: Centrifugal blower + Axial blower
Response speed of AUTO tune: less than 0,5s within same BAND, less than 2s if out of BAND
Power supply: switchable voltages - 220/230/240V for 50Hz or 230/240/250V for 60Hz
(or other primary voltages e.g. 200V 50/60Hz for Japan)
Transformers: 2 pcs of toroidal transformer 2kVA
Dimensions: 485 x 200 x 455mm (width x height x depth)
Weight: 40 kg
Protection circuits: - VSWR too high
  - Anode current too high
  - Anode voltage error
  - Screen current too high
  - Screen voltage error
  - Grid current too high
  - Grid voltage error
  - Heating voltage error
  - Mistuning of PA
  - Temperature too high
  - Soft start for protecting your fuses
  - “switch-on blocking“ at opened amplifier
Indications: 4.3" color touch screen display
Features: High level of protection
  Memory for faults and warnings, easy maintenance
  Automatic set-up anode current (BIAS) – no need to manually adjust after changing the tube
  Three programmable working modes of the axial blower
  Full QSK operation
  Many operational parameters to display
  REMOTE control - connector for LAN connection – remote control software free of charge
  Support automatic external ANT switching

LAN Connection

Power amplifier is interfaced to LAN via XPORT made by Lantronix (type XP1001000-05R). More info can be found at www.lantronix.com .

Default factory settings of XPORT are:

IP address: 192.168.1.222
Mask: 255.255.255.0
Gateway: 192.168.1.1

These are strictly default settings. You can modify any of these by going to XPORT web GUI via your web browser. We do not recommend changing any other parameters of the XPORT interface as loss of communication can be caused by doing so. There is no default user name or password. It is highly recommended to secure web interface with username and password.

For remote control and monitoring over LAN special software is needed. It is available free of charge; it can be downloaded from the following link: Remote control software version 3.36

NOTE: For the correct functioning of the software, it is necessary to have accessible LAN ports 9999 and 10001.

Sotto-Categorie
OM Power
Mpn
OM2500A
Tipo
OM Power
Marca compatibile
Generico

16 altri prodotti della stessa categoria:

Product added to wishlist
Product added to compare.

Questo sito web utilizza i cookie, Accetta Cookies & Policy Sulla Privacy?

Utilizziamo i cookie per personalizzare contenuti ed annunci, per fornire funzionalità dei social media e per analizzare il nostro traffico. Condividiamo inoltre informazioni sul modo in cui utilizza il nostro sito con i nostri partner che si occupano di analisi dei dati web, pubblicità e social media, i quali potrebbero combinarle con altre informazioni che ha fornito loro o che hanno raccolto dal suo utilizzo dei loro servizi. Acconsenta ai nostri cookie se continua ad utilizzare il nostro sito web. Ti Ricordiamo che Ogni 30 Giorni Ti sarà richiesta questa conferma, Leggi la Nostra Privacy Policy Completa